7141 BACKWATER VALVES
   

 

 

    
SENTINEL ALARM SYSTEM
FUNCTION: The Sentinel Alarm System is designed to be installed in an existing floor cleanout closure plug to notify the building maintenance staff or homeowner whenever there is a backup condition detected in the sewer line. The backup may occur due to a drainage system blockage, the system's inability to handle peak flow during a storm surge or backflow from the street sewer. The Sentinel Alarm System is activated by a pressure increase in the vertical portion of the sewer cleanout tee due to a backup condition.
 
REGULARLY FURNISHED:
Wall Mount Alarm Box with Pressure Switch, 15 Feet of 1/4” (6) O.D. Polyethylene Tubing and 1/8” (3) NPT Elbow.

7141 Sentinel Alarm System for Backflow or backup condition in the sewer line.

NOTE: Dimensions shown in parentheses are in millimeters.
APPLICATION REQUIREMENTS:
The top of the horizontal sewer line MUST be 7” (180) below the top of the cleanout plug where the Sentinel Alarm is to be installed.

 

INSTALLATION STEPS:
1. Locate floor cleanout, remove the closure plug and drill and tap for 1/8" (3) NPT connection.
2. Install the supplied elbow fitting into the 1/8” (3) NPT tapped connection in the cleanout closure plug.
3. Connect the elbow and the polyethylene tubing by inserting the tubing into the elbow.
4. Secure the alarm box to the wall and plug in power cord to a 120 VAC wall  receptacle.
5. Connect the polyethylene tubing to the fitting in the bottom of the alarm box.

 


NOTE: For proper operation, all connections between the tubing, fittings and cleanout closure plug MUST be airtight.

7141 Sentinel Alarm System detects backup conditions in the sewer line

Related Links:

Ordering Guidelines

CSI Specifications

Learn more about available Backwater Valves from Smith
       
  Cad Drawing