9660 SMITH STAINLESS STEEL TRENCH DRAINS - FABRICATED
9660  
 

 
6” WIDE MODULAR STAINLESS STEEL TRENCH DRAIN SYSTEM
Engineering Specification and Function: Jay R. Smith Mfg. Co.® stainless steel trench drain channels shall be 39.38” long, 6.38” wide, and have a 4” wide throat with bolting end plates. 23 modular channel sections shall be made of 16 gauge type 304 stainless steel. Channels shall be provided either neutral (flat) or with a .6% pre-slope. Channels shall be available with inverts ranging from 3.75” to 7.50”. Regularly furnished with secured light duty 9870-450-SS slotted stainless steel grate and 4” no-hub vertical outlet on channel sections 2, 5, 10 and 15. End outlet plates are available in 2”, 3”, and 4” no-hub, see table for channel selection. Trench drain shall be Jay R. Smith Mfg. Co.® figure number 9660 series.
Regularly Furnished: Variations: Optional Materials:
Fabricated 16 Gauge type 304 stainless steel trench drain system with pre-sloped modular trench drain body sections (depth as specified #1 shallowest #15 deepest) with bolting end plates, 4” no hub bottom outlet at low end (unless otherwise specified), supplied with secured stainless steel 9870-450-SS slotted grate. Buttweld Outlet -BW
Dome Bottom Strainer -DBS
For Grating Options, see back sheet of Submittal
2" (50), 3" (75), 4" (100) End Outlet (specify size)
4” Center Bottom Outlet (10N only)
Shallow End Cap (Specify Channel)
Deep End Cap (Specify Channel)
Type 316 Stainless Steel -316SS
  Trench Body only

9660 Stainless Steel Trench Drain
Note: Dimensions shown in parentheses are in millimeters.

9660 Stainless Trench Drain Product Photo

Related Links:

Installation Guide

CSI Specifications

Stainless Steel Grates

Smith Stainless Drain Series Brochure

Stainless Steel Benefits Flyer

Cross Reference Guide
   
Go Back