Smith Stainless Product Line Specifications

FLOOR DRAINS – STAINLESS STEEL
9700 FLOOR DRAIN -GENERAL PURPOSE – ADJUSTABLE TOP – LIGHT DUTY
Furnish and install a Jay R. Smith figure no. 9700 general purpose adjustable floor drain for use in finished areas where foot and/or light wheel traffic is expected and a corrosion resistant drain is required.

The drain shall be furnished with a cast CF8 (type 304) rough finish stainless steel body and adjustable 7” round strainer head with satin finish.

Options:
1) Sediment Bucket (-B)
2) 1/2” Trap Primer Connection (-P050)
3) Vandal Proof Top (-U)
4) Flashing Clamp with Seepage Holes (-C)
5) 4” or 6” Dia. Funnel (Specify Fig. 9703)
6) CF8M (Type 316) Stainless Steel (-316)


9710 FLOOR DRAIN –GENERAL PURPOSE – MEDIUM DUTY
Furnish and install a Jay R. Smith figure no. 9710 general purpose 8 1/2” round top floor drain for use in finished or unfinished areas where moderate traffic is expected and a corrosion resistant drain is required.

The drain shall be furnished with a cast CF8 (type 304) rough finish stainless steel body and loose set non-tilt slotted grate.

Options:
1) Sediment Bucket (-B)
2) Flashing Clamp with Seepage Holes (-C)
3) Flat Bottom Strainer (-FBS)
4) Satin Finish Top (-SF)
5) Vandal Proof Top (-U)
6) CF8M (Type 316) Stainless Steel (-316)


9720 FLOOR DRAIN –SPECIAL PURPOSE – MEDIUM DUTY
Furnish and install a Jay R. Smith figure no. 9720 special purpose 8 1/2” round top floor drain for use in floors and areas where infrequent drainage is expected requiring a solid cover and closure plug to prevent sewer gas from entering the building.

The drain shall be furnished with a cast CF8 (type 304) rough finish stainless steel body, secured scoriated cover and stainless steel closure plug with gasket.

Options:
1) Flashing Clamp with Seepage Holes (-C)
2) Satin Finish Top (-SF)
3) Vandal Proof Top (-U)
4) CF8M (Type 316) Stainless Steel (-316)


 9725 FLOOR DRAIN - GENERAL PURPOSE– ADJUSTABLE TOP – MEDIUM DUTY
Furnish and install a Jay R. Smith figure no. 9725 general purpose adjustable 8 1/2” round top floor drain for use in finished or unfinished areas where moderate traffic is expected and a corrosion resistant drain is required.

The drain shall be furnished with a cast CF8 (type 304) rough finish stainless steel body, adjustable extension and loose set non-tilt slotted grate.

Options:
1) Sediment Bucket (-B)
2) Flashing Clamp with Seepage Holes (-C)
3) Flat Bottom Strainer (-FBS)
4) Satin Finish Top (-SF)
5) Vandal Proof Top (-U)
6) CF8M (Type 316) Stainless Steel (-316)


9730 FLOOR DRAIN –GENERAL PURPOSE – HEAVY DUTY
Furnish and install a Jay R. Smith figure no. 9730 general purpose 12” round top floor drain for use in finished or unfinished areas where heavy traffic is expected and a corrosion resistant drain is required.

The drain shall be furnished with a cast CF8 (type 304) rough finish stainless steel body and loose set non-tilt slotted grate.

Options:
1) Sediment Bucket (-B)
2) Flashing Clamp with Seepage Holes (-C)
3) Flat Bottom Strainer (-FBS)
4) Satin Finish Top (-SF)
5) Vandal Proof Top (-U)
6) CF8M (Type 316) Stainless Steel (-316)


9735 FLOOR DRAIN –SPECIAL PURPOSE – ADJUSTABLE TOP– MEDIUM DUTY
Furnish and install a Jay R. Smith figure no. 9735 special purpose adjustable 8 1/2” round top floor drain for use in floors and areas where infrequent drainage is expected requiring a solid cover and closure plug to prevent sewer gas from entering the building.

The drain shall be furnished with a cast CF8 (type 304) rough finish stainless steel body, adjustable extension, secured scoriated cover and stainless steel closure plug with gasket.

Options:
1) Flashing Clamp with Seepage Holes (-C)
2) Satin Finish Top (-SF)
3) Vandal Proof Top (-U)
4) CF8M (Type 316) Stainless Steel (-316)

FLOOR SINKS – STAINLESS STEEL
9691-9699 INDIRECT WASTE RECEPTOR
Furnish and install a Jay R. Smith figure no. 9691 (-12) series 12” square indirect waste receptor with half grate for use in areas where waste effluent is discharged indirectly and a sanitary and corrosion resistant drain is required.

The drain shall be furnished with a fabricated 14 gauge type 304 stainless steel body, cast type 316 loose set half grate with 1/2” square holes and satin finish and perforated dome bottom strainer.

Options:
1) 3/4 Grate (-13)
2) Anchor Flange (-F)
3) Flashing Clamp (-C)
4) 1/2” Trap Primer Connection (-P050)
5) Type 316 Stainless Steel (-316)

FLOOR CLEANOUTS – STAINLESS STEEL

9760 DECK PLUG FLOOR CLEANOUT – MEDIUM DUTY
Furnish and install a Jay R. Smith figure no. 9760 deck plug floor cleanout for use in floors where a gas tight spanner type cover is desired and a corrosion resistant cleanout is required.

The cleanout shall be furnished with a cast CF8 (type 304) rough finish stainless steel body and spanner cover with gasket.

Options:
1) Steel Spanner Wrench (-SW)
2) Type 316 Stainless Steel (-316)

  
 
   

Specialty Drain Section Index

 Go Back

Go Forward